Adjusting The Vibe Foot Braces
Adjusting Vibe Foot Braces is simple:
No tools are needed, as the foot braces come pre-installed, and adjustment can be done by hand.
Instructions:
Pull the trigger on the back of the foot brace.
Slide the brace into the best position for you (we recommend a slight bend in the knee).
Make sure the trigger latch locks into one of the holes in the track.
Related Articles
How do I install the FreeFlow Foot Braces?
INSTALLATION OF THE VIBE FREEFLOW FOOT BRACES Installing the Freeflow Foot Braces is easy and requires no tools! Instructions: If your kayak had Vibe toe-control foot braces installed, first untie the steering cables, then remove those by pushing on ...
How does the rudder steering with the FreeFlow foot braces work?
The braces slide back and forth on the tracks. Sliding the left one forward pushes the rudder to the left and brings the right brace closer to you.
How do I install the rudder on my Vibe Shearwater fishing kayak?
The Vibe Gravity Rudder offers a robust double-hinged, 90° Slide and Stow mechanism that gets the rudder completely out of the water in a heartbeat if it hits an underwater obstacle. In addition, the Gravity Rudder's versatile system has a lot of ...
Vibe Anchor Pole
Our Vibe Anchor Pole is 7', 3 pieces, with a diameter of 3/4". https://vibekayaks.com/products/vibe-anchor-pole-7-fiberglass-3-piece?_pos=2&_psq=anchor&_ss=e&_v=1.0
Vibe Gear Track Base
The four brass inserts on your Yellowfin 100 in front of the cupholder, is made specifically to put a Vibe Gear Track base there, so you can install any accessory! The screws are M6x18mm. https://vibekayaks.com/products/vibe-gear-track-base