How do I install the anchor trolley on my Vibe fishing kayak?

How do I install the anchor trolley on my Vibe fishing kayak?

The anchor trolley comes with instructions and is super easy to install!  You simply pre drill your holes. Put a dab of silicone over them, then plug in the hardware as needed. If you have access to the inside of the kayak, use backing on the hardware. If you do not have access to the inside, use pop rivets. Mount the pulleys first, then the middle cleat. Tie your line at the desired tension, then mount the eyelets to hold the line at the correct level. 
    • Related Articles

    • Vibe Anchor Pole

      Our Vibe Anchor Pole is 7', 3 pieces, with a diameter of 3/4". https://vibekayaks.com/products/vibe-anchor-pole-7-fiberglass-3-piece?_pos=2&_psq=anchor&_ss=e&_v=1.0
    • Can I put a trolling motor on a Vibe fishing kayak?

      Yes, you can install a motor on Vibe fishing kayaks. Once installed, you will need to register the kayak with the state in order to comply with local boating laws, and you are responsible for adhering to all boating laws. To install a trolling motor ...
    • How do I install the rudder on my Vibe Shearwater fishing kayak?

      The Vibe Gravity Rudder offers a robust double-hinged, 90° Slide and Stow mechanism that gets the rudder completely out of the water in a heartbeat if it hits an underwater obstacle. In addition, the Gravity Rudder's versatile system has a lot of ...
    • How do I mount a fish finder and transducer on my Vibe fishing kayak?

      With a Vibe Sea Ghost series fishing kayak this process is easy. Simply mount the transducer in the transducer well, inside the kayak, then mount your fishfinder wherever you choose. Plug the cables into the battery, and you’re all set. If you have a ...
    • How do I clean and protect my Vibe fishing kayak?

      Clean your polyethylene fishing kayak with mild soap and water. Use 303 Protectant or a similar plastic protectant to guard against UV rays and to help your kayak shine.