Check out our instructional video below.

Installation is easy! You can follow these easy steps and watch this video and you should be able to do it yourself in a matter of minutes.

The only tool you will need is a Philips head screwdriver.

Instructions:

1. Take the Summit Seat out of the kayak and set it on a nice solid surface like a table.
2. Take the perch mounts and place them loosely on all 4 corners on the back of the seat.
3. Install the hardware loosely in the mounts as you will need to make adjustments later.
4. Line up the 4 posts on the perch with the posts, moving the posts as needed so the perch fits snuggly over all of them.
5. Once the perch is in place, make sure that the posts are seated fully onto the perch.
6. Tighten all hardware.

And that is all there is to it!

With the Vibe Summit Seat and the Summit Perch you now have an unprecedented advantage. Taking your sight fishing game to new heights.