Vibe Top Loading Gear Track Instructions
Top-loading gear tracks will allow you to easily attach external rod holders, camera mounts, gear retractors and more, so that any essential gear is close-at-hand when you need it most.
.jpg)
No tools are needed, as the gear tracks come pre-installed.
Instructions:
Unscrew the T-Bolt on your accessory until it is almost removed from the accessory.
Tilt the accessory at an angle.
Insert the T-bolt into the top of the track.
Straighten the accessory and tighten down the bolts until secure.
Related Articles
Vibe Gear Track Base
The four brass inserts on your Yellowfin 100 in front of the cupholder, is made specifically to put a Vibe Gear Track base there, so you can install any accessory! The screws are M6x18mm. https://vibekayaks.com/products/vibe-gear-track-baseImpulse Drive Re-Gear Kit Manual
Your Impulse Drive Re-gear Kit comes with 3 different gear ratios 6:1, 8:1, and 10:1. With each step up in gear ratio you will gain more revolutions of the propeller per revolution of the pedals, this will come at the expense of effort needed to ...Adjusting The Vibe Foot Braces
Adjusting Vibe Foot Braces is simple: No tools are needed, as the foot braces come pre-installed, and adjustment can be done by hand. Instructions: Pull the trigger on the back of the foot brace. Slide the brace into the best position for you (we ...How do I mount a fish finder and transducer on my Vibe fishing kayak?
With a Vibe Sea Ghost series fishing kayak this process is easy. Simply mount the transducer in the transducer well, inside the kayak, then mount your fishfinder wherever you choose. Plug the cables into the battery, and you’re all set. If you have a ...How do I install the rudder on my Vibe Shearwater fishing kayak?
The Vibe Gravity Rudder offers a robust double-hinged, 90° Slide and Stow mechanism that gets the rudder completely out of the water in a heartbeat if it hits an underwater obstacle. In addition, the Gravity Rudder's versatile system has a lot of ...