How does the rudder steering with the FreeFlow foot braces work?
The braces slide back and forth on the tracks. Sliding the left one forward pushes the rudder to the left and brings the right brace closer to you.
Related Articles
How do I install the FreeFlow Foot Braces?
INSTALLATION OF THE VIBE FREEFLOW FOOT BRACES Installing the Freeflow Foot Braces is easy and requires no tools! Instructions: If your kayak had Vibe toe-control foot braces installed, first untie the steering cables, then remove those by pushing on ...
Do I need to set up both sets of rudder steering cables?
The rudder steering cables will need to be tied from the foot braces to the rudder for foot steering. If you choose to use the hand steering, cables will need to be tied from the steering handle to the rudder. This will allow the rudder to be ...
Do I need to set up both sets of rudder steering cables?
The rudder steering cables will need to be tied from the foot braces to the rudder for foot steering. If you choose to use the hand steering, cables will need to be tied from the steering handle to the rudder. This will allow the rudder to be ...
Vibe Makana 100 Assembly – Paddle and Rudder Setup
Getting your Vibe Makana 100 ready to paddle The Makana 100 ships partially assembled. The paddle and the rudder system are the two main items that need final assembly. Paddle assembly Locate the two paddle halves and the connecting ferrule in the ...
Adjusting The Vibe Foot Braces
Adjusting Vibe Foot Braces is simple: No tools are needed, as the foot braces come pre-installed, and adjustment can be done by hand. Instructions: Pull the trigger on the back of the foot brace. Slide the brace into the best position for you (we ...