Additional FAQs
How do I obtain a MSO (Manufacturer's Statement of Origin) to register my kayak with the state?
You will need a manufacturer's statement of origin (MSO) and your order confirmation email/receipt when registering your new kayak. If you have purchased a new kayak from us, the MSO (Manufacturer's Statement of Origin) should have been included in ...
Vibe Anchor Pole
Our Vibe Anchor Pole is 7', 3 pieces, with a diameter of 3/4". https://vibekayaks.com/products/vibe-anchor-pole-7-fiberglass-3-piece?_pos=2&_psq=anchor&_ss=e&_v=1.0
Installing a Fishfinder
Adding a fishfinder to any of Vibes kayaks is easy, though a few additional accessories will make your life easier for some models. Additional Items you will need: A transducer arm of your choosing. These can be found at any kayak dealer, or at ...
Adjusting The Vibe Foot Braces
Adjusting Vibe Foot Braces is simple: No tools are needed, as the foot braces come pre-installed, and adjustment can be done by hand. Instructions: Pull the trigger on the back of the foot brace. Slide the brace into the best position for you (we ...
Vibe Top Loading Gear Track Instructions
Top-loading gear tracks will allow you to easily attach external rod holders, camera mounts, gear retractors and more, so that any essential gear is close-at-hand when you need it most. No tools are needed, as the gear tracks come pre-installed. ...
What are the best kayak racks for the top of my car or SUV?
Any of the name brands will work perfectly! Ex: Thule, Malone, Yakima, etc. Check out our Vibe website or Vibe Shop for great kayak rack options and deals! https://vibekayaks.com/collections/accessories/cartop-and-roof-racks
How do I mount a fish finder and transducer on my Vibe fishing kayak?
With a Vibe Sea Ghost series fishing kayak this process is easy. Simply mount the transducer in the transducer well, inside the kayak, then mount your fishfinder wherever you choose. Plug the cables into the battery, and you’re all set. If you have a ...
How do I install the anchor trolley on my Vibe fishing kayak?
The anchor trolley comes with instructions and is super easy to install! You simply pre drill your holes. Put a dab of silicone over them, then plug in the hardware as needed. If you have access to the inside of the kayak, use backing on the ...
A part of my accessory broke (for example, the latch on my center console) can I order a new part?
Unfortunately, we do not have individual pieces for products, such as latches for consoles, but for certain products (like consoles) we do have them available for purchase to replace them on your kayak. If you believe the accessory broke due to a ...
For accessories, how do I know what to choose, or what brand to choose?
The choice of accessories and brands to kit out your Vibe fishing kayak is a personal preference, and also dependent on what type of activities you like to do on the water. Feel free to check out our Vibe Kayaks Owner's Group on Facebook to see what ...
What are the tankwell dimensions?
Shearwater 125- 24" long 19" wide Makana 100- 22" long 20" wide and 4" deep Sea Ghost Series Sea Ghost 130 - 19.5” X 31.5” tapes off to 10” X 31.5” Sea Ghost 110 - 17.5” X 18.5” tapers off to 11”X18.5” Yellowfin Series Yellowfin 100 Yellowfin 120 - ...
Do I need to set up both sets of rudder steering cables?
The rudder steering cables will need to be tied from the foot braces to the rudder for foot steering. If you choose to use the hand steering, cables will need to be tied from the steering handle to the rudder. This will allow the rudder to be ...
How do I install the Gravity Rudder?
The Vibe Gravity Rudder offers a robust double hinged, 90° Slide and Stow mechanism that gets the rudder completely out of the water in a heartbeat if it hits an underwater obstacle. In addition, the Gravity Rudder's versatile system has a lot of ...
How do I install the Bixpy?
The Bixpy J-2 Powershroud easily attaches to the Bixpy-Ready Vibe Gravity Rudder, and the Bixpy J-2 Outboard Kit includes everything you need to motorize your Vibe kayak within minutes. One of the places where the Vibe Shearwater shines is in its ...
What is the diameter of the scupper holes?
1 ⅜”. *The use of scupper carts will void your Vibe Kayaks Limited Lifetime Warranty.
Can I put a trolling motor on a Vibe fishing kayak?
Yes, you can install a motor on Vibe fishing kayaks. Once installed, you will need to register the kayak with the state in order to comply with local boating laws, and you are responsible for adhering to all boating laws. To install a trolling motor ...
Where can I find the HIN/Serial number on my Vibe fishing kayak?
HIN numbers can be found on the right side of the kayak (standing at stern looking forward) just below the side seam demarcating the hull and deck. Position of the HIN number will be within 18-inches forward of stern. HIN numbers are scribed into the ...
Will the accessory tracks on Vibe kayaks fit all products?
The tracks are pretty universal and should fit almost any product with a track slide.
What is the Facebook Vibe Owners Group for?
The Vibe Kayaks Owners group on Facebook is a community of folks who love everything Mother Nature has to offer, but especially getting out on the water for paddling and kayak fishing. The Vibe Tribe provides fantastic resources for tips and tricks ...
How do I store my fishing kayak?
The recommended way to store your kayak is on its sides, which are the thickest, strongest part of the kayak. You can achieve this by using straps (suspended from your ceiling) or by securely propping it against a wall. If you are storing it on saw ...
Which Vibe kayaks are rudder capable?
The Sea Ghost 130, Sea Ghost 110, Yellowfin 130T, Yellowfin 120, Makana 100, and Shearwater 125 are all rudder capable. The Cubera 120, Skipjack 90, and Yellowfin 100 are not rudder ready.
There are a lot of kayaking terms. Can you help me?
Having a basic understanding of kayaking and paddling terms will help you understand what people say, or what you're reading, when it comes to your Vibe fishing kayak and being on the water. Here's a list of some terms we thought would be helpful for ...
What are the kayaks made of?
Our kayaks are made out of rotomolded single-piece high-density polyethylene.
How do I know what is included on the kayak?
Check out the specs on the kayak listing by scrolling down to the specs tab. Here is Yellowfin 120 example: https://vibekayaks.com/products/vibe-yellowfin-120-kayak-package?variant=40224369901746
What does the kayak weigh and what is the weight capacity?
Shearwater 125 Fully loaded weight- 109lbs Capacity- 475lbs Makana 100 Fully loaded weight- 77lbs Capacity- 400lbs Cubera 120 Fully loaded weight- 78lbs Capacity- 475lbs Sea Ghost 130 Fully loaded weight- 92lbs Capacity- 550lbs Sea Ghost 110 Fully ...
Do you have a two-person kayak?
We do, the Yellowfin 130T! Check it out here: https://vibekayaks.com/products/vibe-yellowfin-130t-tandem-kayak-package?variant=40224372621490
Why does my kayak look different than another kayak in the same color?
Each one is slightly different, like a snowflake! Each kayak has its own color variation! Color variations are not covered under the warranty. The kayaks are made from poured plastic so each kayak has a unique color blend. If you would like to return ...
Do you recommend a certain trolling motor?
Trolling motors are a personal preference, and while we here at Vibe love what they do at Bixpy, you may find other recommendations in our Facebook Owners Group!
How thick is the plastic hull on the kayak?
The thickness of the plastic varies from 3.5mm-5mm depending on the area of the kayak.
How do I mount a fish finder and transducer?
With a Sea Ghost, this process is easy. Simply mount the transducer in the transducer well inside the kayak, then mount your fish finder wherever you choose. Plug the cables into the battery and you're all set. If you have a different kayak you will ...
Do I need to set up both sets of rudder steering cables?
The rudder steering cables will need to be tied from the foot braces to the rudder for foot steering. If you choose to use the hand steering, cables will need to be tied from the steering handle to the rudder. This will allow the rudder to be ...
How does the rudder steering with the FreeFlow foot braces work?
The braces slide back and forth on the tracks. Sliding the left one forward pushes the rudder to the left and brings the right brace closer to you.
Is it okay to leave my kayak outside uncovered?
It is not recommended to leave a kayak outside uncovered. The extreme temperatures and direct sun can warp the hull of the kayak so it may not perform the way it was built to. Also, the weather and insects can impact the cosmetics of the kayak.
How do I clean and protect my Vibe fishing kayak?
Clean your polyethylene fishing kayak with mild soap and water. Use 303 Protectant or a similar plastic protectant to guard against UV rays and to help your kayak shine.
How can I make sure I know the safest way to paddle my fishing kayak?
Safety first! For terrific safety advice for being on the water in your kayak or canoe, the American Canoe Association (ACA) is an excellent resource for getting the most out of your paddling experience through information and training. Vibe shares ...
How do I store my fishing kayak?
The recommended way to store your kayak is on its sides, which are the thickest, strongest part of the kayak. You can achieve this by using straps (suspended from your ceiling) or by securely propping it against a wall.
What Vibe kayaks are best for rivers and lakes, and what kayaks are best for oceans?
While you can take any of Vibe’s kayaks on the ocean, certain fishing kayak models are better suited for larger bodies of water, or for an ocean’s surf and currents, or for especially bad weather where stability is of prime importance. Larger and ...
What kind of water should I use a Vibe fishing kayak in? Can I use it in the ocean?
You can take any Vibe kayak in the ocean, but some of our models are more suited for ocean wake and surf stability, and crossing long distances quickly. Typically the longer the kayak the better it handles open bodies of water. The smaller the kayak ...
Can you drill into a kayak?
Yes, you can drill into a kayak and mount gear tracks and certain other parts. If you do drill, you will want to use waterproof silicone to keep the holes watertight. Also, if you do not have access to the inside for backing, then you can use pop ...
Where are Vibe’s kayaks made?
Our premium kayaks are designed and engineered at our Headquarters Kennesaw, GA and manufactured in China.
Next page