Troubleshooting & Care
How to Re-Glue a Detached Fin Box on Your Vibe Inflatable Kayak (Uptown 100 & Cubera 125 Lite)
This article applies to the Vibe Uptown 100 and Cubera 125 Lite inflatable kayaks. If the fin box on the bottom of your kayak has started to peel away or has come fully detached, you can re-attach it at home using the glue from the patch kit that ...
How to remove a dent from your kayak using the sun's warmth
This short video shows you how to remove a dent from your kayak when it's been tied on too tight to your roof rack or storage racks. Just use the heat of the sun to remove the dent.
In this video I show you how to quickly and effectively fix the hull of your fishing kayak.
Repairing small and deeper gouges and scratches in your polyethylene plastic hull is relatively easy with the right tools and some patience. Tools needed: Heat gun or blow torch Spoon Work in a well ventilated area and follow the instructions in this ...
How to Register Your Kayak - Understanding Your HIN
Do I need to register my kayak? Registration requirements vary by state. In most US states, non-motorized kayaks used on regulated waterways must be registered. Some states exempt human-powered boats; others do not. Check with your state's fish and ...
Inflatable Kayak - Valve, Pump, and Inflation Troubleshooting (Cubera, Uptown)
This article covers the Vibe Cubera 120, Cubera 125 Lite, and Uptown 100 Lite inflatable kayaks. If you are having trouble inflating, connecting your pump, or the kayak is not holding pressure, this guide will walk you through the most common causes ...